Light Fixture Repair
A pool light that is out or flickering usually has a failed bulb, a bad seal, or a corroded fixture. We repair the fixture so the light works safely underwater.

Hillside Pool & Spa repairs and upgrades pool lights across Pflugerville, fixing the fixtures, the wiring, and the bulbs that make night swims safe and your pool look its best.
A focused pool lighting visit covers the specific problems that show up on Pflugerville pools. Here is what we handle on every repair.
A pool light that is out or flickering usually has a failed bulb, a bad seal, or a corroded fixture. We repair the fixture so the light works safely underwater.
A light that keeps failing usually has a wet niche or a damaged cord. We repair the niche and the cord so the light holds up over time.
A light that will not power on usually has a failing transformer or a wiring fault. We diagnose the power path so the light gets the voltage it needs.
We upgrade older incandescent pool lights to bright, efficient LED fixtures that last longer and use a fraction of the power. An LED upgrade is what modernizes the look.
A light that trips the GFCI usually has a ground fault in the fixture or the cord. We repair the fault and test the GFCI so the light runs safe.
We test the light, the transformer, and the wiring, and hand you a clear written diagnosis before any repair starts. Knowing the real cause is what keeps a fix from coming back.
Pflugerville pools run Hayward and Pentair pool lights, and our technicians know the common fixture failures and the LED upgrade paths on each. The older pads in Heatherwilde often have incandescent fixtures ready for an LED upgrade, while the newer Falcon Pointe builds tend to run LED already. Knowing the light generation on your pad is what keeps a diagnosis quick and correct.
We use genuine Hayward and Pentair pool light fixtures, LED retrofit bulbs, transformers, and cord kits, because aftermarket lights fail fast and can create a safety issue underwater. Every part is matched to your specific fixture and niche. We never guess at a fit, and we test the light and the GFCI before we leave. For the full scope of our pool lighting work across the area, see our Pool Lighting overview page.
We diagnose the real cause, send a clear written quote, and verify the fix before we leave your Pflugerville backyard.
We test the fixture, the bulb, the transformer, the wiring, and the GFCI, and trace the problem to the real cause.
Before any part goes in, we send a straightforward written quote for the repair so you know the plan, no pressure.
We install the part or the upgrade, test the light underwater, and confirm the GFCI and the transformer work before we leave.
A failing pool light takes away the safety and the look of your night swims, and a light that trips the GFCI is a safety issue that needs attention. These signs tell you a repair visit is the fastest fix.
Catching a wet niche or a failing transformer early is what keeps a small repair from turning into a full fixture replacement.
We always start with a clear diagnosis, because the right call between repairing and replacing a pool light depends on the fixture, the niche, and the age of the unit. A bulb, a seal, or a transformer often just needs a repair, while a corroded fixture or a damaged niche usually points to a replacement. We lay out both options honestly so you can choose what fits your pool. There is no pressure to pick the bigger job.
If a replacement or an LED upgrade is the better path, we send a free written quote after seeing your situation, no pressure, and we match the new light to your niche and your transformer. You approve the scope before any work starts, so there are never surprise charges. Our goal is the fix that lasts, not the fix that gets us out the door fastest.
Tell us what your pool light is doing and we will send a clear written quote for the repair, no pressure.
Get A Free QuoteFrom the older incandescent fixtures in Heatherwilde ready for an LED upgrade to the modern LED lights in Falcon Pointe, we know the lighting types common to each Pflugerville neighborhood. That deep familiarity helps us diagnose faster. See our full Pflugerville pool service page for everything we offer in the area.
Pool lighting repair in Pflugerville is shaped by the mix of older incandescent fixtures and newer LED lights and the moisture that corrodes the older niches. Here is what we plan around on every repair.
The older pools in Heatherwilde and Settlers Ridge often still run incandescent pool lights, and those fixtures are reaching the age where seals fail, lenses corrode, and bulbs burn out regularly. A light that is out or flickering on these routes is a common call, and an LED upgrade is often the better long-term fix than replacing the old fixture. Knowing the light generation shapes whether we repair or upgrade. The age of these fixtures is the real driver behind most lighting calls here.
Pool light niches on older Pflugerville pads are prone to moisture intrusion that corrodes the fixture and the cord over time, which causes flickering and GFCI trips. A light that keeps failing is often a wet niche and not just a bad bulb, so we inspect the niche and the cord before recommending parts. Repairing the niche is what keeps the next light from failing the same way. That moisture check matters more on the older pads than on the newer sealed fixtures.
Beyond pool lighting, our team handles the full range of pool work across Pflugerville. One crew covers the cleaning, the repairs, and the remodels.
Answers to what Pflugerville homeowners ask before booking a pool light repair.
Call now or request a free quote and we will send a clear written plan for your pool.